Latest Services http://www.rye-enterprises.com Latest Services Wed, 09 May 2018 16:38:20 +0530 en-us http://www.rye-enterprises.com Low Voltage Directive http://www.rye-enterprises.com/low-voltage-directive.htm http://www.rye-enterprises.com/low-voltage-directive.htm Wed, 09 May 2018 00:00:00 +0530 We are amid the most sought-after Low Voltage Directive Consultants. Having vast experience in Low Voltage Directive Consultancy, we offer quick, reliable Low Voltage Directive Services in Canada. The Low Voltage Directive (LVD) 2006/95/EC is one of the oldest Single Market Directives adopted before the "New" or "Global" Approach. However, Low Voltage Directive does characterize both with a conformity assessment procedure applied to equipment before placing on the Market and with Essential Health and Safety Requirements (EHSRs) which such equipment must meet either directly or by means of harmonized standards. The Low Voltage Directive ensures that electrical equipment within certain voltage limits both provides a high level of protection for European citizens and enjoys a Single Market in the European Union. The Directive covers electrical equipment with a voltage between 50 and 1000 V for alternating current and between 75 and 1500 V for direct current. It should be noted that these voltage ratings refer to the voltage of the electrical input or output, not to voltages that may appear inside the equipment. For most electrical equipment, the health aspects of emissions of Electromagnetic Fields are also under the domain of the Low Voltage Directive. For electrical equipment within its scope, the Directive covers all health and safety risks, thus ensuring that electrical equipment is safe in its intended use. Guidelines on application and Recommendations are available - including LVD Administrative Co-operation Working Group (LVD ADCO) documents and recommendations - as well as European Commission opinions within framework of the Directive. Machinery Directive http://www.rye-enterprises.com/machinery-directive.htm http://www.rye-enterprises.com/machinery-directive.htm Wed, 09 May 2018 00:00:00 +0530 We are a prominent Service Provider offering Machinery Directive Consultancy in Canada. The scope of the Machinery Directive is extended, since construction-site hoists and cartridge-operated fixing and other impact machinery will no longer be excluded. The borderline between the Machinery and the Low Voltage Directive is clarified. The distinction will no longer be made on the basis of the "main risk". Instead, the new Machinery Directive lists six categories of electrical machinery that are subject to the Low Voltage Directive - for other electrical machinery, the safety objectives of the Low Voltage Directive apply for the electrical risks, but the obligations concerning conformity assessment and the placing on the market are governed by the Machinery Directive. The borderline with the Lifts Directive has also been clarified. The new text modifies the scope of the Lifts Directive so that lifts with a travel speed no greater than 0.15 m/s will be excluded from the Lifts Directive and will thus be subject to the Machinery Directive. We have a team of experienced Machinery Directive Consultants to provide the best directive solutions. Our Machinery Directive Services can be availed by the clients from almost any industry. CSA Registration http://www.rye-enterprises.com/csa-registration.htm http://www.rye-enterprises.com/csa-registration.htm Wed, 09 May 2018 00:00:00 +0530 For CSA Registration in Canada, we can be contacted any time. We are engaged in undertaking CSA Registration - Certification and Testing. In order to provide the best CSA Registration Services, our company can test and certify products you are selling at home or exporting to the USA and Canada, eliminating the need for duplicate testing. Thus, CSA Registration helps in saving your time and money. We have a panel of specialized CSA Registration Consultants to test products to Canadian and US standards and issue the CSA Mark for qualified products. At R.Y.E. Enterprises, we provide CSA Registration in Canada. By availing our expert CSA Registration Services, you can get your products/services tested and certified to ensure that they meet with Canada-U.S quality standards. CSA certification mark is a sign of quality and safety; it is provided for a wide range of electrical, gas, mechanical, plumbing and other such products. With your products carrying this internationally recognized mark, you will be identified as a credible manufacturer. Also, it will be easy to introduce your products in the U.S and Canada markets. Our company has an expert team of CSA Registration Consultants that tests the product/process/service and certifies that it meets the CSA standards. With our CSA Registration - Certification and Testing, you can save your valuable time and money. There would be no need for duplicate testing. The CSA certification mark is an assurance of quality and safety; it is widely accepted in the North American markets. Whether you are selling or exporting your products to US or Canada, this mark will add a stamp of credibility to your identity as a manufacturer or supplier. ATEX Directive http://www.rye-enterprises.com/atex-directive.htm http://www.rye-enterprises.com/atex-directive.htm Wed, 09 May 2018 00:00:00 +0530 For expert ATEX Consultancy, one can make contact with us. We are a prominent Service Provider rendering ATEX Directive Consultancy in Canada. Capitalizing on the expertise of veteran ATEX Consultants, we offer time-bound ATEX Compliance Services. We offer highly effectual ATEX Directive Solutions to different industrial segments. The ATEX Consultancy Services can be availed from us at very reasonable prices. ATEX Directive 94/9/EC : The 'Directive on Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres' (94/9/EC) entered into force on 1 March 1996. The Directive is commonly referred to as the 'ATEX' Directive ('ATmospheres EXplosibles'), but may also be called the ATEX Equipment Directive or ATEX 95. The Directive applies to electrical and/or mechanical equipment used on the surface, below the ground and on fixed offshore installations. Specifically, the Directive Covers : All equipment intended for use in potentially explosive atmospheres and which are capable of causing an explosion through their own potential sources of ignition. Protective systems intended for use in potentially explosive atmospheres. Protective systems are defined as units which are intended to halt incipient explosions immediately and/or to limit the effective range of explosion flames and explosion pressures Components, which are defined as any item essential to the safe functioning of equipment and protective systems, but with no autonomous function. ATEX Groups and Categories : Equipment and Products that fall within the scope of the Directive are divided into two Groups :  Group I : comprises equipment intended for use in mines, above and below ground. Group II :comprise equipment intended for use in other locations endangered by explosive atmospheres. Equipment and Products in each Group are divided into Categories based on the level of protection required. ATEX Zones : In addition to the ATEX Directive 94/9/EC, which covers the safety requirements for equipment to be used in potentially explosive atmospheres, there is an additional European ATEX Directive, 99/92/EC.  This is also known as the 'ATEX Workplace Directive' or 'ATEX 137' and highlights what employers must do to minimize the risk to workers from explosive atmospheres. ATEX 137 also classifies hazardous areas where an explosive atmosphere could form, by type of hazard. CRN registration for Pressure Vessels http://www.rye-enterprises.com/crn-registration-for-pressure-vessels.htm http://www.rye-enterprises.com/crn-registration-for-pressure-vessels.htm CRN Registration Wed, 09 May 2018 00:00:00 +0530 If you are looking to manufacture or set up a CRN registration for Pressure Vessels in your plant for export to Canada, getting the vessel a Canadian Registration Number is a must. We, at R.Y.E. Enterprises, offer you our services for a hassle-free registration. Leave your worries for documentation, design submission and approvals to us. Our team of experts has the full knowledge of rules and regulations for getting the Pressure Vessels registered. Our CRN consultants do all the work needed, from start to finish!We offer you the expert services to relieve you of this headache at nominal charges. We ensure our clients of timely registrations so that their operations can begin swiftly and smoothly. One requirement for obtaining any CRN # is that the manufacturer must have a ASME Certificate. CRN Registration for Boiler http://www.rye-enterprises.com/crn-registration-for-boiler.htm http://www.rye-enterprises.com/crn-registration-for-boiler.htm CRN Registration Wed, 09 May 2018 00:00:00 +0530 Getting approvals from government authorities before commencing the installations could be a hard task. However, if your unit requires the installation of a Boiler and it’s going to Canada, you can entrust RYE Enterprises for getting this task done in a trouble-free manner. Considering the dangers associated with use of Boilers, separate registration is needed for each province and like pressure vessels, you must have a Professional Registered Engineer on staff.Our experts CRN Consultants help you with understanding the basic requirements of registration. We undertake the responsibility of submitting your vessel drawings, specifications, calculations, previous registrations etc. and ensure to have your Boilers issued an authentic Canadian Registration Number on time. Our CRN registration services, CRN Registration for Boiler can be availed at affordable rates. CRN Registration for Pressure Fittings http://www.rye-enterprises.com/crn-registration-for-pressure-fittings.htm http://www.rye-enterprises.com/crn-registration-for-pressure-fittings.htm CRN Registration Wed, 09 May 2018 00:00:00 +0530 We, RYE Enterprises, are a prominent CRN registration service provider in Canada. For putting up Pressure Fittings related to Pressure Vessels and Boilers, getting a government approval is a necessity to ensure the safety of your men and machinery. Under the registration act, there are several complicated clauses that need to be well-understood by you. Our team helps you to under these norms and submit the precise drawings and specifications showing the exact working of the Pressure Fittings to facilitate your CRN registration. We also guide you in exceptional cases where registration might not be required. Avail our CRN Registration for Pressure Fittings services at affordable prices and leave your tensions regarding timely CRN registration to us. CRN Registration for Piping http://www.rye-enterprises.com/crn-registration-for-piping.htm http://www.rye-enterprises.com/crn-registration-for-piping.htm CRN Registration Wed, 09 May 2018 00:00:00 +0530 Piping is the basic structural requirement of any industry. The Piping System has to have CRN registered fittings if it is used with any pressure vessels or boilers and bigger than 1 inch in diameter. RYE Enterprises helps you to get a CRN registration in a wrangle-free manner. The numerous requirements of submitting drawings, calculations, demonstrating designs etc. are taken care of by our qualified personnel. We have Registered Professional Engineers on staff and this is a requirement when dealing with any Provincial Agency.Our services aim at reducing your worries internal capacity, at times, may not require registration. We help you understand such intricate clauses of the act better. These CRN Registration for Pipingservices can be enjoyed at market leading prices. CRN Registration Renewal http://www.rye-enterprises.com/crn-registration-renewal.htm http://www.rye-enterprises.com/crn-registration-renewal.htm CRN Registration Wed, 09 May 2018 00:00:00 +0530 For ensuring the safety of life and property at your manufacturing unit, it is imperative that your equipment is regularly checked and approved for use by authorities. For this very reason, CRN registrations are required to be renewed. RYE Enterprises takes up this responsibility for getting the Pressure and Boiler Vessels, Piping, Fittings etc. a Renewal CRN Registration. The registration renewal time for different types of industrial equipments is different. Our company helps you keep a track of these renewal needs along with getting the Renewal CRN Registration renewed for you in a timely manner at nominal rates. This ensures that your operations keep on running smoothly. When is a CRN Number Required http://www.rye-enterprises.com/when-is-a-crn-number-required.htm http://www.rye-enterprises.com/when-is-a-crn-number-required.htm CRN Registration Wed, 09 May 2018 00:00:00 +0530 CRN, i.e. Canadian Registration Number is a special number issued to manufacturers of boilers, pressure vessels and fittings / piping as CRN registration is needed for every province. Each province or territory in Canada requires a fresh CRN number to be issued. The primary purpose of issuing this number is to avert the possibility of disasters that certain industrial equipment(no s) can cause. This equipment(no s) is Pressure Vessels, Boilers, Pressure Fittings and Piping systems. Before installation or manufacturing of this equipment(no s), the concerned party needs to submit the exact structural drawings, calculations, specifications, demonstrative drawings etc. to the authorities for approval. The issuing of this number is like a certificate for quality, ensuring that the equipment is safe to be used.